Batch Completion Time
Estimate whole batches and synchronized parallel waves using one elapsed setup delay and a full cycle for every partial batch.
Use batch completion time →CALCULATORS BY INDUSTRY
Machining calculators
Relate entered cutting speed, RPM, feed, travel, removal and cutting-force assumptions.
8 free tools. No signup. Methods, examples and source links on every page.
Cutting Speed & Spindle RPM
Convert an entered surface speed in metres per minute and effective cutting diameter in millimetres into rotational speed.
Use cutting speed & spindle rpm →Milling Feed Rate & Travel Time
Multiply entered RPM, effective teeth and chip load, then estimate ideal feed-travel time for a defined path and number of passes.
Use milling feed rate & travel time →Machining Batch Cost
Spread setup and whole expected-start costs over a required good-part batch.
Use machining batch cost →Turning Machining Time
Time repeated identical turning passes from entered constant RPM, feed and travel allowances.
Use turning machining time →Machining Power & Torque
Ideal cutting kW = removal rate in cm³/min × specific cutting force in N/mm² ÷ 60,000.
Use machining power & torque →Milling Material Removal Rate
Rectangular-engagement removal rate in cm³/min = axial millimetres × radial millimetres × table feed in mm/min ÷ 1,000.
Use milling material removal rate →Turning Material Removal Rate
For the stated turning relation, material removal in cm³/min is surface speed in m/min × depth of cut in mm × feed in mm/revolution.
Use turning material removal rate →Before you use these calculations
Use the effective cutting diameter and engaged teeth for the operation.
Enter tooling and material parameters supported by the supplier or your measured process.
Ideal arithmetic excludes machine limits, rigidity, wear and setup constraints.
Start with the example, replace the assumptions with your measurements, then change one input to see its effect. Save or export the scenario if you need to keep its basis.
How Case calculators are built and checked →Read practical calculation guides or browse another industry.