Case &ContrastFree calculators

Density & measurement

Liquid Mass & Volume Calculator

Estimate liquid mass from volume, or volume from mass, using your entered density. See liters, cubic meters, kilograms, tonnes and pounds together.

70 / APPLY A KNOWN DENSITY

Your numbers.
A clearer decision.

Free to use. No signup.
Inputs stay in this browser.

Starting values are illustrative. Use your own costs, rates and assumptions.

INPUT GROUP 01

Known measurement and density

Use a density at the same temperature and composition as the measured liquid.

Check the assumptions before acting on a result.

Read the method and example

YOUR CALCULATION

Mass and liquid volume at the entered density.

Mass (kg)

850

Volume (L)

1,000

Volume (m³)

1

Mass (metric tonnes)

0.85

Mass (international pounds)

1,873.929

Keep the calculation

Saving is optional and stays on this device. Unsaved edits are not kept when you leave. CSV includes every input and the current results.

Illustrative inputs loaded. Replace them with your own assumptions.

How the liquid mass & volume calculator works

Mass equals volume multiplied by density. With volume in liters and density in kg/L, the result is kilograms. If mass is the starting measurement, volume in liters equals mass in kilograms divided by density. Density must be greater than zero.

One cubic meter is 1,000 liters, one metric tonne is 1,000 kilograms, and one international pound is 0.45359237 kilograms. Kilograms and pounds here are units of mass rather than force. The density unit kg/L is numerically equal to g/mL.

Density depends on the actual material, temperature and composition. The example is a fictional density rather than a product recommendation. The tool does not apply thermal expansion, pressure corrections, mixture volume changes, buoyancy or a vessel load limit.

Worked example

At an entered density of 0.85 kg/L, 1,000 L corresponds to 850 kg, 1 m³, 0.85 metric tonnes and approximately 1,873.929 pounds. Selecting mass and entering 850 kg at the same density returns 1,000 L.

Sources and assumptions

The source material explains the underlying calculation or pricing structure. Entered prices, costs, schedules and scenario choices are your assumptions; this tool does not obtain supplier quotes or predict actual results.

  • Petroleum Barrel Volume

    Convert petroleum barrels, U.S. liquid gallons, liters and cubic meters. The barrel is explicitly 42 U.S. liquid gallons, with no temperature correction.

  • Water Flow Unit Conversion

    Convert a steady volumetric flow between liters per minute, liters per second, cubic meters per hour and U.S. gallons per minute.

  • Viscosity Unit Converter

    Relate dynamic and kinematic viscosity using density supplied for the same fluid state.

  • Energy Unit Conversion

    Convert an energy quantity between kWh, joules, megajoules, International Table Btu and a declared therm convention. Keep energy separate from power.

Calculation methods, testing and sources · Practical calculation guides